|
The link will take you to the official website of the Arduino where you may download the program to program your Arduino. http://www.arduino.cc/en/Main/Software On the site you will find versions for Mac, Linux and Windows. |
|
With this new program you can play the role of the engines, based on the controller commands the radio by radio frequency, enabling both engines, because with a quick setup you select the channels for each engine, so these commands transfer to the Modelixino 2.6 which selects the command and activates the respective motor. To see this program. |
|
Read more...
|
|
Another program for you to uncover more and more Modelixino 2.6, we have presented many of these programs so that all people have the opportunity to try out the various functions is provided for an interesting micro-controller, this program will be the rate of change of a analog sensor to determine the status of the LED, which when activated will remain on for five seconds. See more about this program. |
|
Read more...
|
This program has as its option, perform the firing of the LED's apartir the relationship of one analog sensor, which in this example is the Light Sensor MODELIX.
All we understand that analog works closely with rate changes on your system, but this sensor would be different, as the LDR (Light Depedente of Abrasion), work rate in the ambient lighting to turn the LED's, it is impossible the simultaneous activation of both, because the program is determined that this does not occur.
See this interesting program and create various other activities. |
|
Read more...
|
|
|
For better clarification, let down the sketch of the program, just remember that in order to run it, you need the program Modelixino 2.6 be installed on your computer. To download the sketch click the right mouse button, and select Save As. Click here to download |
|
Read more...
|
|
Basing his commands on a touch sensor MODELIX will trigger an LED to justify the situation in which he is the contact. This program provides a digital readout (high or low), to drive an LED in five seconds. After testing and analyzing this program, create new ideas for your project that unravel the micro controller has to offer. See the program. |
|
Read more...
|
Another program to be presented, aims to drive LED's, starting at a Touch Sensor MODELIX.
It will run with a criterion of performances, the functionality of a digital sensor, ie, two situations high or low (on / off), so the LED's will not work simuntaneamente.
See more in this program and try to develop other ideas for your needs. |
|
Read more...
|
|
|
|
|
|
Feed Entries 
Programs
